Dell OptiPlex XE2 (Mid 2013) User Manual
Page 38

Option
Description
•
Enable Intel Virtualization Technology for Direct I/O - This option is enabled
by default.
Trusted Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
technology. The TPM virtualization technology, and Virtualization technology for
direct I/O must be enabled to use this feature.
•
Trusted Execution - This option is disabled by default.
Table 9. Maintenance
Option
Description
Service Tag
Displays the service tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
SERR Messages
Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Table 10. Image Server
Option
Description
Lookup Method
Specifies how the ImageServer looks up the server address.
•
Static IP
•
DNS (enabled by default)
NOTE: This field is only relevant when the
Integrated NIC
control in the
System
Configuration
group is set to
Enabled with ImageServer
.
ImageServer IP
Specifies the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the
Integrated NIC
control in the
System
Configuration
group is set to
Enabled with ImageServer
and when
Lookup
Method
is set to
Static IP
.
ImageServer Port
Specifies the primary IP port of the ImageServer, which is used by the client to
communicate. The default IP port is 06910.
NOTE: This field is only relevant when the
Integrated NIC
control in the
System
Configuration
group is set to
Enabled with ImageServer
.
Client DHCP
Specifies how the client obtains the IP address.
•
Static IP
•
DHCP (enabled by default)
NOTE: This field is only relevant when the
Integrated NIC
control in the
System
Configuration
group is set to
Enabled with ImageServer
.
Client IP
Specifies the static IP address of the client. The default IP address is 255.255.255.255.
38