Dell OptiPlex XE2 (Mid 2013) - Manual (Page 36)

Table 5. Performance
Option Description
Multi Core Support Specifies whether the process will have one or all cores enabled. The performance of
some applications will improve with the additional cores.
• All - Enabled by default
• 1
• 2
Intel ® SpeedStep ™ Allows you to enable or disable the Intel SpeedStep mode of the processor. This
option is enabled by default.
C States Control Allows you to enable or disable the additional processor sleep states. This option is
enabled by default.
Intel ® TurboBoost ™ Allows you to enable or disable Intel TurboBoost mode of the processor.
• Disabled - Does not allow the TurboBoost driver to increase the performance
state of the processor above the standard performance.
• Enabled - Allows the Intel TurboBoost driver to increase the performance of
the CPU or graphics processor.
Hyper-Thread Control Allows you to enable or disable the Hyper-Threading technology. This option is
disabled by default.
Table 6. Power Management
Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after an AC
power loss. You can set the AC Recovery to:
• Power Off (default)
• Power On
• Last Power State
Auto On Time This option sets the time of the day when you would like the system to turn on
automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The
startup time can be changed by typing the values in the time and A.M./P.M. fields.
• Disabled - The system will not automatically power up.
• Every Day - The system will power up every day at the time you specified
above .
• Weekdays - The system will power up Monday through Friday at the time you
specified above.
• Select Days - The system will power up on days selected above at the time
you specified above.
NOTE: This feature does not work if you turn off your computer using the switch
on a power strip or surge protector or if Auto Power is set to disabled.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5
36