beautypg.com

13 english, Setting the z-enhancer plus, Adjusting the z-enhancer plus – Clarion DXZ656MP User Manual

Page 13: Adjusting the tone, Adjusting the subwoofer output volume, Basic operations

background image

280-8166-00

DXZ656MP

13

English

Setting the Z-Enhancer Plus

This unit are provided with 4 types of sound
tone effects stored in memory. Select the one
you prefer.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [Z+] button, the tone
effect changes in the following order:

“Z+ OFF”

“Z+ BASS BOOST” “Z+

IMPACT”

“Z+ EXCITE” “Z+ CUSTOM”

“Z+ OFF” ...

• Z+ BASS BOOST : bass emphasized

• Z+ IMPACT

: bass and treble

emphasized

• Z+ EXCITE

: bass and treble

emphasized mid de-
emphasized

• Z+ CUSTOM

: user custom

• Z+ OFF

: no sound effect

Adjusting the Z-Enhancer Plus

1. Press the [Z+] button and select the Z-

Enhancer Plus mode to adjust.

2. Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the – direction.
●When “BASS BOOST 0” selected, you can

adjust the bass in the range of –3 to 3.

●When “IMPACT 0” selected, you can

adjust the bass and treble in the range of
–3 to 3.

●When “EXCITE 0” selected, you can adjust

the bass and treble in the range of –3 to 3.

∗ When Z-Enhancer Plus is selected, press and

hold the [Z+] button for 1 second or longer to
change to the “CUSTOM” mode.

Bass/treble characteristics become flat and the
Z+ FLAT” is shown in the display.

Press the [Z+] button again to change to the
Z+ OFF” mode.

Adjusting the tone

Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
When “Z+ BASS BOOST” is set

“SUB-WOOF VOL 0”

“BASS BOOST 0"

“BALANCE 0” “FADER 0” Last
function mode.

When “Z+ IMPACT” is set

“SUB-WOOF VOL 0”

“IMPACT 0”

“BALANCE 0”

“FADER 0” Last

function mode.

When “Z+ EXCITE” is set

“SUB-WOOF VOL 0”

“EXCITE 0”

“BALANCE 0”

“FADER 0” Last

function mode.

When “Z+ CUSTOM” is set

“SUB-WOOF VOL 0”

“ BASS GAIN 0”

“ TREBLE GAIN 0” “BALANCE 0”
“FADER 0”

Last function mode.

When “Z+ OFF” is set

“SUB-WOOF VOL 0”

“BALANCE 0”

“FADER 0”

“Last function mode.

∗ “SUB-WOOF VOL” can be adjusted only when

SUB-WOOFER” is set to “ON”.

Adjusting the subwoofer output
volume

You can adjust the volume output from the unit’s
subwoofer output terminal.

1. Press the [A-M] button and select

SUB-WOOF VOL 0”.

2. Turning the [ROTARY] knob clockwise

increases the output volume; turning it
counterclockwise decreases the output
volume.
∗ The factory default setting is “0”. (Setting

range: –6 to 6)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Basic Operations