beautypg.com

Pressure washer, Pre-operation – Campbell Hausfeld IN470200AV User Manual

Page 5

background image

5

Pressure Washer

www.chpower.com

uNPACKING
Remove the equipment and all parts from the carton . The
carton should contain the following:
• One pressure washer (pump, engine, cart base)
• One cart handle assembly
• One spray gun
• One lance
• One tip holder with 2 spray tips. Additional tips available

for purchase, see Page 13

• One high pressure hose
• One pack of nuts, bolts, and manuals
If any parts are missing, DO NOT reTurN THe uNIT TO THe
reTAILer.
Know the unit’s model number (located on the
serial number tag on the pressure washer frame) and call
1-800-330-0712 for replacement parts .
After unpacking the product, inspect it carefully for any
damage that may have occurred during transit . Make sure to
tighten fittings and bolts before using the pressure washer .

do not operate the unit if it’s

damaged during shipping, handling,

or use. damage could result in bursting and cause injury or
property damage.

Figure 2 - Pump hook up

Garden

Hose

Pump

Inlet

Pump

Outlet

High

Pressure

Hose

Chemical Injector

Hose Barb

Thermal

Relief

Valve

Brass

Swivel

Adapter

Figure 3 - Brass swivel adapter

Connect This
End To Garden
Hose

Washer

Washer With
Filter Screen

Connect This
End To Pump

Figure 4 - Connect the brass swivel to
the pump

Brass Swivel
Adapter

Pump Inlet

Pre-Operation

ASSeMBLY
1 . Slide the handle assembly over the lower legs of the cart

base . Use the supplied nuts and bolts to secure the handle
to the legs . See Figure 1 .

2 . Brass Swivel Adaptor (See Figure 2) . If it’s not already

attached to the pump inlet, assemble the brass swivel
adapter and attach it to the pump inlet (See Figure 3 and
Figure 4) . Be sure to connect the correct side of the brass
swivel adapter to the pump .

Figure 1 – Assemble Handle

This manual is related to the following products: