Citizen Systems Compact desk-top dot matrix printer CBM-910 Type II User Manual

Page 49

— 45 —

(15)

×4 Enlarged Letter Assignment (FS + “W” + 1) Command

FS (1CH) + “W” (57H) + 1 (01H) code input,

×4 enlarged letters are assigned.

Data following this code are printed vertically and laterally twice enlarged.

(16)

×4 Enlargement Cancel (FS + “W” + 0) Command

With FS (1CH) + “W” (57H) + 0 (00H) code being input,

×4 enlargement

assignment is cancelled.

Note 1: Although standard and laterally enlarged letters can coexist in one

line, automatic (buffer-full) printing takes place on reaching to 24th
(40th) column counted in standard characters.

Note 2: With

×4 enlargement and double-width having been assigned, ×4

enlargement has priority.

Application Example)

[Receiving Data]

1C W 1 123456789 CR
1C W 0 ABC 1C W 1 123 CR
1C W 0 A 1C W 1 12345678901B

123456789
ABC123

1234567891

The last letter, although in

×4 assignment, is printed

in standard letter since it being in the 24th column.
(For 40 column mechanism, this applies to the 40th
column.)

(17) Set Line Spacing (ESC + “A” + n) Command

Sets a line space of “n2” dot line by the entry of ESC (1BH) + “A” (41H) + n
code. Initial setting is 2-dot line space.
Here, n is an even number in the range of 0

≤ n ≤ 255.

Note: When an odd number is set to n, a line space of n

−1 dots is specified.

When n=0 or 1 is specified, continuous printing is permitted.