Undocking your tablet-pc from the media base – Dell Latitude XT2 (Early 2009) User Manual
Page 10
8
Media Base
Undocking Your Tablet-PC From the Media Base
CAUTION:
Never undock the Tablet-PC without first preparing the Tablet-PC for
undocking. If you undock before preparing the Tablet-PC, you will lose data and
the Tablet-PC may not recover normal operation for several minutes, if at all.
CAUTION:
If the Tablet-PC does not have a charged battery in the battery bay, you
must shut down the Tablet-PC through the Windows
Start menu and then undock
the Tablet-PC. If you undock the Tablet-PC without a battery before shutting it
down, you will lose data and the Tablet-PC may not recover normal operation for
several minutes, if at all.
1 Follow the procedures in "Before Docking or Undocking Your Tablet-PC to
the Media Base" on page 4.
2 If your media base is secured using an anti-theft device, unlock it.
3 Disconnect the AC adapter connector from the media base.
4 Pull the Tablet-PC release lever forward to release the Tablet-PC from the
media base.
5 Lift the back of the Tablet-PC up and slide the Tablet-PC out towards the
back of the media base.
1
Tablet-PC
2
release lever
3
media base
1
2
3
book.book Page 8 Tuesday, December 2, 2008 1:03 PM