How to feed with the bypass mode, Mode). (see p. 28.), Ument scanning. (see p. 28.) – Canon DR-2580C User Manual

Page 32: How to feed with the bypass mode 1

Text mode
Original mode

Using the Scanner

IMPORTANT
• If the paper feed operation stops due to a system error or a paper jam while

the scanner is scanning, resolve the problem, make sure that the scanned
image of the last page that was fed has been stored, and then resume the
scanning operation.

• Note that documents that are printed on thin paper may fall out of the

document eject tray.

• After you finish scanning, close the document feed tray and the document

eject tray extension to prevent damage to the scanner while it is not being
used.

How to Feed with the Bypass Mode

Move the feed selection lever to the nonseparated document (

) side.

Place the document into the document feed tray one sheet at a time, so that it
touches the stoppers, and adjust the position of the document guides.

Start scanning from the application.

Feed Selection Lever