Casio EXILIM EX-Z21 - Manual (Page 85)

85
Other Playback Functions (PLAY)
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use [4] and [6] to scroll through the movie
and search for the frame (point) from which
or to which you want to cut the movie (the cut
point).
• You also can search for the cut location by
playing back the movie and pressing [SET] to
pause. During playback, you can press [4] or [6]
to perform fast reverse or fast forward.
3.
When the frame where you want the cut point to be is displayed, press
[2].
4.
Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
Cut
(Point-To-Point Cut)
1 While the frame you want the first (From) cut to be is
displayed, press [2].
2 While the frame you want the second (To) cut to be
is displayed, press [2].
Cut
(From-Point Cut)
While the frame you want the cut to be from is
displayed, press [2].
Cut range (red)
}
~
¡