beautypg.com

Troubleshooting – Casio CTK-451 User Manual

Page 34

background image

E-32

See page

Page E-14

Page E-16

Page E-16

Page E-16

Page E-14

Page E-21

Page E-29

Page E-24

Page E-21

Action

1. Correctly attach the AC adaptor,

make sure that batteries poles (+/
–) are facing correctly, and check to
make sure that batteries are not
dead.

2. Set the POWER/MODE switch to

the NORMAL position.

3. Use the MAIN VOLUME button to

increase volume.

4. Normal play is not possible on the

accompaniment keyboard while the
POWER/MODE switch is set to
CASIO CHORD or FINGERED.
Change the POWER/MODE switch
setting to NORMAL.

Replace the batteries with a set of new
ones or use the AC adaptor.

Use the ACCOMP VOLUME button to
increase the volume.

Change the transpose or tuning pa-
rameter value to 0 or 00.

1. Check the display to see if the indi-

cator for one of the parts is not dis-
played. If so, press the part’s but-
ton (LEFT ON/OFF, RIGHT ON/
OFF) to turn it on.

2. Adjust accompaniment volume.

Problem

No keyboard Sound

Any of the following symptoms
while using battery power.
• Dim power supply indicator
• Instrument does not turn on
• Display that is flickering,

dim, or difficult to read

• Abnormally low speaker/

headphone volume

• Distortion of sound output
• Occasional interruption of

sound when playing at high
volumes

• Sudden power failure when

playing at high volumes

• Flickering or dimming of the

display when playing at high
volume

• Continued sound output

even after you release a key

• A totally different tone may

sound

• Abnormal rhythm pattern

and Song Bank play

• Loss of power, sound distor-

tion, or low volume when
playing from a connected
computer or MIDI device

Auto Accompaniment does not
sound.

The key or tuning does not
match when playing along with
another instrument.

Missing Song Bank tune.

Possible Cause

1. Power supply problem.

2. Power is not turned on.

3. Volume setting is too low.

4. The POWER/MODE switch is in

the CASIO CHORD or FINGERED
position.

Low battery power

Auto accompaniment volume is set to
0.

The tuning or transpose parameter is
set to a value other than 0 or 00.

1. Left-hand or right-hand part is

turned off.

2. Accompaniment volume is set to 0.

Troubleshooting

622A-E-034A

01.7.26, 10:41 AM

Page 32

This manual is related to the following products: