Chauvet DMX-44 - Manual (Page 14)

Operating Instructions
DMX-44 User Manual 14 Revised: 2006-01-13 21:30:19
Playback (Chases)
M AN U AL R U N C H AS E S
This function allows the user to manually step through each individual step in a chase.
Action

1) Press and hold PROGRAM button for 3
seconds to enter programming mode.
2) Start a chase by pressing any one of the
CHASE buttons.
3) Press the Tapsync/Display button to
manually step through the chase.
4) Use the BANK buttons to scroll through the
chases.
5) Press and hold the PROGRAM button for 3
seconds to exit programming mode.
Notes

AU T O R U N C H AS E S
Action

1) Press any one of the CHASE buttons.
2) Press and release the Auto / Del button.
The corresponding LED will blink.
3) Adjust the SPEED and FADE faders to your
liking.
4) You can override the speed and fade time
by tapping the Tapsync/Display button
(three) times. The chase will now run on the
interval time of the taps.
Notes

CAUTION! The fade setting should never be slower
than the speed setting or the scene will never
complete execution.
M U SI C R U N C H AS E S
Action

1) Press any one of the CHASE buttons.
2) Press and release the Music/Bank-copy
buttons. The corresponding LED will blink in
the display.
3) Your chase will now run to sound.
Notes
