Dell PowerEdge R900 - Manual (Page 24)

22
Dell™ Rack Installation Guide
Figure 1-9. Installing the System Status Indicator Cable
4 Attach the I/O cable connectors and power cable connectors to their
respective connectors on the system back panel.
For details on cable connections, see your system’s Installation and
Troubleshooting Guide and the User’s Guide.
NOTE:
Use the strain-relief loops (if available) on the back of the power
supplies to provide strain relief for the power cables.
1 system status indicator cable plug 2 strain-relief loops
(1 per power supply, if available)
3 release latch 4 system status indicator
5 system status indicator slot
3
1
4
2
5