Wire spool installation – Chicago Electric MIG 180 Wire Feed Welder 68886 User Manual
Page 9
Page 9
For technical questions, please call 1-800-444-3353.
SKU 68886
Wire Spool Installation
1.
Turn the welder OFF and unplug
it before proceeding.
2. Pull up on the door latch,
then open the Door.
3. Remove the Spool Knob, Spool Spring, and upper
Spool Plate. If replacing a Spool, remove the old
Spool and all remaining wire from the liners.
4. Place the new Wire Spool over the Spool Spindle
and on top of the lower Spool Plate as illustrated.
To prevent wire feed problems, set the
Spool so that it will unwind clockwise.
5. Secure Spool in place with the upper Spool Plate
(narrower end against the Spool),
then the Spool Spring and Spool Knob.
MIG 180
WIRE FEED WELDER
ITEM 68886
WIRE FEED SPEED
240V~
I
O
door
latch
Door
Spool Knob
Wire Spool
Lower
Spool Plate
Upper
Spool Plate
Spool Spring
Spool Spindle
wire must
unwind this
direction
SAFETY
MAINTENANCE
BASIC WELDING
WELDING TIPS
SETUP
- Auto-darkening Welding Helment with ANSI-Approved Lens 91214 (10 pages)
- 10" Compound Miter Saw with Laser Guide 69683 (20 pages)
- 95629 (39 pages)
- 12V Lithium-Ion Multifunction Tool 67707 (15 pages)
- 96405 (19 pages)
- 44567 (28 pages)
- Electric Impact Wrench 68099 (16 pages)
- 1/2" vaRiaBle SPeeD ReveRSiBle HEAVY DUTY DRILL 69452 (16 pages)
- 96035 (20 pages)
- 94882 (16 pages)
- 94739 (20 pages)
- CORDLESS SPRAY GUN 90880 (14 pages)
- MIG-100 91124 (13 pages)
- 9"Angle Grinder 93179 (12 pages)
- Heavy Duty Oxy - Acetylene Welding Outfit 92496 (20 pages)
- 18 Volt Corldess Impact Driver 68853 (12 pages)
- 67616 (16 pages)
- 91332 (8 pages)
- 12V Lithium CordLess drill 69360 (14 pages)
- 7" Angle Grinder 69454 (20 pages)
- Power Tools/ Electric Drywall Screwdriver 9624 (12 pages)
- 1/3 Sheet Finishing Sander 94338 (12 pages)
- Wire Feed Welder MIG 170 (32 pages)
- 97717 (15 pages)
- STUD WELDER DENT REPAIR KIT 3223 (9 pages)
- 99702 (22 pages)
- 68568 (12 pages)
- 45338 (15 pages)
- Power Tools 12" DOUBLE-BEVEL SLIDING COMPOUND MITER SAW WITH LASER GUIDE 69684 (20 pages)
- Circular Saw with Laser 95004 (18 pages)
- Power Tools / 1" Variable Speed SDS Rotary Hammer 69276 (16 pages)
- 12V Cordless Auto-Hammer 68364 (12 pages)
- Flexible Shaft Grinder/Carver 40432 (12 pages)
- 47991 (8 pages)
- 40388 (17 pages)
- MIG 200 93804 (36 pages)
- Stapler/Nailer 93749 (12 pages)
- 98107 (20 pages)
- 92880 (16 pages)
- 7.5 Amp Reciprocating Saw 69067 (16 pages)
- 66127 (12 pages)
- HARBOR FREIGHT TOOLS 98753 (11 pages)
- 67845 (16 pages)
- 1/2'' Electric Impact Wrench 45252 (16 pages)
- 14 Industrial Cut-off Saw 68104 (12 pages)