Dell PowerEdge T710 - Manual (Page 4)

System Security Screen
New POST Messages
The following are the new POST messages for the Intel Xeon 5600 series
processors.
Option Description
Intel(R) TXT (Disabled
default) Enables/disables Trusted Execution Technology. To enable
TXT, enable & activate VT & TPM with pre-boot
measurement.
Message Description
System Memory Size:
X.X GB, System Memory
Speed: XXX MHz,
Voltage: 1.5V or 1.35V
Displays the amount of system memory, system
memory speed, and current system memory
operating voltage.
This CPU power rating
is not supported
This message displays when either of the following
occurs:
• The Intel Xeon 5600 130 W series processor is
detected on an old system board (systems not marked
with roman numeral II). For a list of the supported
systems, see Important Information.
• The Intel Xeon X5677 130 W series quad-core
processor is detected on PowerEdge M610 and
M710.
Non-ECC DIMM detected
on DIMM XX
Displays when the system detects a non-ECC
memory module.