ClearSounds AMPLIFIED FREEDOM PHONE CSC600D - Manual (Page 22)

22 – ENGLISH
Dialing from Standby Mode
You can enter the desired phone number in standby mode,
which allows you to verify the number before dialing. If
you have the TALKING DIALING function turned ON, the
number will be announced as you dial (see page 23 for more
information). Follow these steps:
1. Enter a telephone number (up to 32 digits) and verify
it is correct. If you make a mistake while entering a
number, press the Clear soft key to delete it.
2. When the number appears correctly, lift the handset or
press the Speaker key and it will dial.
Dialing from the Caller ID List (see page 35)
Dialing from the Redial List (see page 26)
Dialing from the Memory M1 – M5 keys
Press one of the M1 – M5 memory dial keys and the phone
will automatically begin to dial (see page 25 on how to
program the memory dial keys).
Reminder:
Press the Back or Exit soft key from any menu to
return to the previous screen. Otherwise, after 60 seconds,
the phone will automatically return to the main screen from
any menu if no key is pressed.
█ Dialing Mode Setting
Your ClearSounds® CSC600D comes from the factory preset
for touch-tone service. Should you need to change this
setting based on the type of phone service you have, use
Tone
for touch-tone service or Pulse for rotary dialing.
NOTE:
If you are not sure which dialing mode to select,
please contact your local phone service provider.
TELEPHONE SETTINGS