ClearSounds AMPLIFIED FREEDOM PHONE CSC600D - Manual (Page 20)

20 – ENGLISH
█ Making a Call
Using the Handset
1. To make a call, lift the handset and listen for a dial
tone.
2. You can dial a number manually or press one of the
memory dial keys once programmed. If you make a
mistake while entering a number, press the Clear soft
key to delete it or hang up and begin again.
3. Adjust your volume and tone settings if needed.
4. When finished, hang up the handset.
Using the Speakerphone
1. Press the Speaker key on the base and listen for a dial
tone.
2. Dial the number you want to call. If you make a
mistake while entering a number, press the Clear soft
key to delete it or hang up and begin again.
3. Adjust your volume by using the volume control
VOLUME- or VOLUME+ located on right side of the
phone.
4. When finished, press the Speaker key to hang up.
5. To change back from speakerphone to handset
use, simply pick up the handset to disable the
speakerphone. The
icon will disappear from the LCD.
6. To change back from handset to speakerphone, simply
press the Speaker key and then hang up the handset.
The
icon will appear on the LCD and the handset is
disabled.
NOTE:
You can also press and hold any memory key for two
seconds and the speakerphone will turn on and automatically
dial the programmed number.
Using Audio and Telephone Neckloop/Headset Jacks
Your phone is equipped with both Audio and Telephone
Headset jacks, providing total flexibility and multi-
functionality. Both jacks are amplified, allowing you to
adjust both the tone and volume. These jacks accommodate
a variety of optional accessories including neckloops,