Dell Alienware Aurora (Late 2009) - Manual (Page 87)

087
087
/
CHAPTER 17: ACTIVE-VENTING ASSEMBLY
Replace the screw that secures the right top-panel to the chassis. 10.
Replace the drive-bay shroud (see “Replacing the Drive-Bay Shroud” on 11.
page 19).
Close the PCI shroud (see “Closing the PCI Shroud“ on page
12. 18).
Replace the left side-panel (see “Replacing the Left Side-Panel“ on page 13. 11).
Connect your computer and devices to electrical outlets and then turn 14.
them on.
Replacing the Active-Venting Assembly
Follow the instructions in “Before You Begin” on page 1. 6.
Place the active-venting assembly on the top of the chassis. 2.
Connect the active-venting assembly cables to the connectors on the 3.
master I/O board.
Replace the three screws that secure the active-venting assembly to the
4.
chassis.
Align the top panel with the slots in the chassis and replace the two screws
5.
that secure the top panel to the chassis.
Replace the right top-panel.
6.
Lay the chassis on its side. 7.
Replace the ten screws that secure the active-venting assembly to the top 8.
of the chassis.
Replace the top lighting-board (see “Replacing the Top Lighting-Board” on
9.
page 76).