Dell Alienware Aurora (Late 2009) - Manual (Page 110)

0110
0110
/
CHAPTER 22: SYSTEM SETUP
Integrated Devices
Configure SATA#1-6 as
(available on Aurora and Aurora ALX
only)
Allows you to configure the integrated
hard drive controller to AHCI or RAID.
SATA Mode
(available on Aurora-R2 only)
Allows you to configure the integrated
hard drive controller to AHCI or RAID.
AHCI CD/DVD Boot Time out
Allows you to set the wait time for
SATA or CD/DVD in AHCI mode.
Power Management Setup
Suspend Mode
Sets the energy-saving mode of the
ACPI function.
AC Recovery
Sets what action the computer takes
when power is restored.
Remote Wakeup
(available on Aurora and Aurora ALX
only)
Sets the system to wake up from an
onboard LAN, PCIE-X1 LAN card, or a
PCI LAN card.
Auto Power On
Allows the computer to start up at a
certain time.
Integrated Devices
USB Functions
Allows you to enable or disable the
integrated USB controller.
HD Audio Controller
Allows you to enable or disable the
integrated audio controller.
Onboard IEEE1394 Controller Allows you to enable or disable the
onboard IEEE 1394 controller.
LAN1 BCM5784 Device
(available on Aurora and Aurora ALX
only)
Allows you to enable or disable the
onboard LAN controller.
Onboard LAN Controller
(available on Aurora-R2 only)
Allows you to enable or disable the
onboard LAN controller.
LAN1 Option ROM
(available on Aurora and Aurora ALX
only)
Allows you to enable and disable the
network controller’s boot option.
Onboard LAN Boot ROM
(available on Aurora-R2 only)
Allows you to enable and disable the
network controller’s boot option.
SiL3132 E-Sata Device
(available on Aurora and Aurora ALX
only)
Allows you to enable and disable the
e-SATA controller.
JMicron-362 E-SATA Device
(available on Aurora-R2 only)
Allows you to enable and disable the
e-SATA controller.