Dell PowerEdge Rack Enclosure 4020S - Manual (Page 3)

Installing the Side Stabilizer Feet
1 Remove the lower side panels (see "Removing the Lower Side Panels"
in your rack installation guide).
2 On the side of the rack frame’s bottom rail, locate the four holes
(see Figure 1-2).
3 Position each stabilizer foot against the base of the rack frame and align
its holes with the corresponding holes in the frame.
4 Use the provided bolts, washers, and cage nuts to secure each foot to the rack
as shown in Figure 1-2.
Figure 1-2. Installing the Side Stabilizer Feet
1 side stabilizer foot (2)
1