Compaq iP-40 - Manual (Page 41)

E-
Menu Description
Pointer • Screen
This selects the shape, color, and size of the pointer.
 Pointer shape ..................Selects the shape of the pointer
from 2 types.
 Pointer color ....................Selects the color of the pointer from
amongst 3 types (i.e., red, white,
and blue).
 Pointer size ......................The size of the pointer can be
changed in 3 levels.
 Mute mode ......................Sets the image that will be dis-
played at the time of screen dele-
tion.
Black: Displays an entirely black
screen.
Wallpaper: Displays the wallpaper
image.
 Storage image quality ......Select the picture quality for saving
OHP documents in the history.
Fine: When this is selected, the file
size is large and fewer images can
be stored, but the picture quality is
high.
Standard: When this is selected,
more images can be stored, but the
picture quality is not as good.
SD format ............................Execute formatting of the SD mem-
ory card.
* The format type is FAT16.
NOTE:
When the write protect switch of the SD memory card is
disabled, no formatting can be done.
 Computer input ................Select the input signal (RGB or
component video).
RGB: Use this to project images on
a computer.
Component*: Use this to project
D1 to D4 video images.
* An optional D terminal/RGB conversion cable is required.
* If Component is selected, connect the video’s audio to the
video audio input terminal.
* When a component is chosen, do not enter the RGB signal (PC
video). It is not displayed normally.
During OHP input
OHP input only
PC input only
During PC/Component video input
During Video input
OHP input only