Connections with the personal computer, Caution – Compaq iP-40 User Manual
Page 18
E-1
Connections with the Personal Computer
Basic Connections
Connections with Personal Computers
NOTE:
• After connecting the PC connection cable, set the external output and the computer’s screen display settings on the computer.
• When the settings of the external output have not been made, "No signal being input" will be displayed.
• When a condition in which a signal has not been input continues for 15 minutes or longer, the lamp is turned off automatically.
(This only functions when the auto power off mode is set to “ON”. See page E-44.)
TEST
RGB
V
L
R
USB
AUDIO
MEMORY
* No USB cable is included with the iP-40BE.
(*)
Connection Precautions
• To protect this projector and the equipment to be connected, switch off the power of each unit be-
fore making connections.
• Please read the various equipment instruction manuals for information about the connection of
the equipment and the method of use.
• When connection is made with a notebook computer and the image is displayed on the LCD
screen of the notebook computer, a proper display might not be obtained on projection screen.
Switching off the display of the notebook computer will result in a proper display. The method of
switching off the display of the notebook computer will differ depending on the PC manufacturer.
Please read the instruction manual of the notebook computer for details.
• Connection might not be possibly depending on the model and settings of the personal computer.
Please contact your dealer of purchase for further information.
CAUTION
To the RGB out-
put connector
of the personal
computer
To t h e a u d i o
output connector
of the personal
computer
To the USB
connector of
the personal
computer
Plug in the connection cable
and fasten with the screws
NOTE:
• Input Connectors
→ See Page E-10.
• Please see the "iP Viewer Software Program Operating Instructions" for the method of use when there is a USB cable con-
nection.
* The USB cable and SD memory card can be used only for iP-40SE.
PC connection cable (Supplied item)*
Audio cable with mini plugs (Commercially available)