beautypg.com

Balance, Fader, Adjusting magna bass extend – Clarion DXZ645MP User Manual

Page 14: Radio operations, Listening to the radio, Seek tuning, Manual tuning, English, Fm reception, Tuning

background image

14

DXZ645MP

English

Radio Operations

FM reception

For enhanced FM performance the

®

tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.

Listening to the radio

1. Press the [FNC] button and select the radio

mode. The frequency appears in the display.

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the
radio reception band changes in the following
order:

FM1

➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [

a] or [d] button to tune in the

desired station.

Tuning

There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.

Seek tuning

1. Press the [BND] button and select the de-

sired band (FM or AM).

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.
MANU” in the display goes off and seek tun-
ing is now available.

2. Press the [

a] or [d] button to automatically

seek a station.

When the [

d] button is pressed, the station is

sought in the direction of higher frequencies; if
the [

a] button is pressed, the station is sought

in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and
step tuning.

When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.

1. Press the [BND] button and select the de-

sired band (FM or AM).

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.
MANU” is lit in the display and manual tuning
is now available.

2. Tune into a station.

Basic Operations

∗ The factory default setting is “T

Е

Е

Е

Е

Е

FREQ 12K

О

О

О

О

О

”.

(Adjustment 8 kHz/12 kHz)

4. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the balance

1. Press the [A-M] button and select “BAL 0”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.

∗ The factory default setting is “BAL 0”. (Adjust-

ment range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the fader

1. Press the [A-M] button and select “FADER 0”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.

∗ The factory default setting is “FADER 0”. (Ad-

justment range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound ad-
justment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.

∗ The factory default setting is off.

1. Press and hold the [A-M] button for 1 second

or longer to turn on the MAGNA BASS EX-
TEND effect. “M-B EX” lights in the display.

2. Press and hold the [A-M] button for 1 second

or longer to turn off the MAGNA BASS EX-
TEND effect. “M-B EX” goes off from the dis-
play.