Canon Leather Soft Case 70 - Manual (Page 65)

Shoo
tin
g
63
4
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the
button.
zOnly one color can be specified.
zYou can use the
or button to specify the range of col-
ors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to
swap
5
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the
button.
• Only one color can be specified.
6
Press to complete the setting, then
shoot.
z The default setting for color swap mode changes green into
white.
z You may not obtain the expected results if you use the
flash.
z The colors specified in the color swap mode and the color
range are retained even if the camera's power is turned off.