AAXA Technologies M1 Standard - Manual (Page 6)

Startup and Shutdown – To startup, connect the
power supply or external battery to the rear power
receptacle. Press and hold the power button for 3
seconds until the welcome logo appears. To shut-
down hold the power button for 3 seconds until
optical engine turns off.
Positioning – Position the projector at an even plane and a right angle to the
desired image. If the projector is not at a right angle or on an even plane the
projected image will appear distorted.
7
GENERAL OPERATION
Startup and Shutdown – To startup, connect the power supply or external
battery to the rear power receptacle. Press and hold the power button for 3
seconds until the welcome logo appears. To shutdown hold the power button for
3 seconds until optical engine turns off.
Positioning – Position the projector at an even plane and a right angle to the
desired image. If the projector is not at a right angle or on an even plane the
projected image will appear distorted.
6
Power Button
Power Supply
Receptacle
GENERAL OPERATION