Cobra Electronics XRS R9G - Manual (Page 9)

Installation Overview
Nothing Comes Close to a Cobra ® 5
Mount the MDU high on windshield to right of rear view mirror (Figure B).
The MDU must have a clear view through the windshield, be parallel to the
road (Figure C) and have clearance to snap into the “up” position.
Position the MDU for easy access to power switch, cable connections and for
mirror movement. Mount the MDU on the windshield close to the headliner.
(See page 7 for details.)
IMPORTANT: Do not block the MDU lens with the sun-shaded area of the
windshield (Figure D).
Heated windshields currently available on some vehicles (Instaclear for Ford,
Electriclear for GM), may block or weaken incoming signals. Consult your
automobile manufacturer.
Introduction
Figure B Figure C
THIS SURFACE TOWARDS
SKY
Figure D
External View
MDU Lens
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:30 PM Page 5