Getting started, Main standby screen, Rdu battery – Cobra Electronics XRS R9G User Manual
Page 22: I-mute/city or hwy mode, Car voltage, Standby screens
18 English
Getting Started
Press Mute/
while the Standby screen is displayed to cycle through
different Standby screens.
The Standby screens will be displayed in the following order:
Main Standby Screen
Standby screen displays information about detector: alert
filtering, automatic muting functions and RDU battery
status. If GPSL is connected, compass heading and GPS
status icon also display.
RDU Battery
RDU Battery screen displays status of RDU battery.
Indicates charge left in battery or if it is plugged into
power source and is charging.
I-Mute/City or Hwy Mode
I-Mute screen displays status of alert filtering (City or
Highway modes) and automatic muting (IntelliMute)
functions. Refer to related sections to set these features.
Car Voltage
Car Voltage screen displays voltage level of car battery. If
battery voltage drops below 11.9 volts, an alert sounds.
Low Car Voltage feature in Alert Settings programming
must be activated.
Standby Screens
•
Charging
I-MUTE
CITY
Main Standby
Screen
RDU
Battery
I-Mute
City/Hwy Mode
Car
Voltage
Latitude/
Longitude
Speed
Compass
Compass, Speed and Latitude/Longitude screens
only display if GPSL is connected to system.
NOTE: Last Standby screen viewed will be displayed when exiting Auto
Dark mode.
Your Detector
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:31 PM Page 18