Installation, Main detector unit (mdu) – Cobra Electronics XRS R9G User Manual
Page 11
Installation
Your Detector
Nothing Comes Close to a Cobra
®
7
1. Position MDU before actual
mount.
• Do not attempt to adjust
MDU bracket.
• Hold unit in place.
• Using non-permanent
pen, mark two opposite
corners.
2. Peel off film from two-piece
fastener strips. Align with
two corner markings made
in step 1. Press MDU
bracket against windshield.
• Fastener strips cannot
easily be removed.
Strength of adhesive
strips increases with
time.
• Do not pull on MDU for
first 20 minutes.
Main Detector Unit (MDU)
XRS_R7_R9G_Final_012507.qxd:Layout 1 1/25/07 4:30 PM Page 7
This manual is related to the following products:
See also other documents in the category Cobra Electronics Sports and recreation:
- ESD-9570 (21 pages)
- XRS 9950 (23 pages)
- BAND XRS 9670 (21 pages)
- XRS 970 (21 pages)
- MR HH300 (25 pages)
- ESD-9560 (17 pages)
- PRO 9780 (22 pages)
- 12 BAND XRS 9840 (21 pages)
- XRS 9540 (15 pages)
- Pro 9680 (22 pages)
- XRS 9445 (15 pages)
- XRS 9930 (21 pages)
- XRS 9675 (21 pages)
- ESD-9050 (12 pages)
- XRS 9960G (24 pages)
- ESD-9150 (16 pages)
- 14 BAND XRS 9570 (15 pages)
- IRADAR 480-667-PVERSIOND (2 pages)
- XRS 9940 (21 pages)
- 9 BAND ESD 9270 (13 pages)
- XRS 989 (23 pages)
- XRS 9730 (21 pages)
- 14 BAND XRS 9470 (15 pages)
- XRS 9965/70G (27 pages)
- Pro 9380 (16 pages)
- ESD-9160 (16 pages)
- XRS 9700 (22 pages)
- ESD 8200 (11 pages)
- Band Ultra XRS 9745 (21 pages)
- PRO 9480 (16 pages)
- XRS 9845 (23 pages)
- ESD 7000 (11 pages)
- ESD 7400 (10 pages)
- ESD6060 (13 pages)
- 15 BAND XRS 9770 (21 pages)
- ESD-9110 (16 pages)
- XRS 9955 (23 pages)
- Mrf 80b (83 pages)
- xrs 9400 (16 pages)
- XRS 9830 (21 pages)
- XRS 9440 (15 pages)
- ESD-9100 (15 pages)
- PRO 7080 (12 pages)
- XRS 9300 (21 pages)