Installation – FRIGIDAIRE FFHT1831QQ User Manual
Page 5

5
WARNING
The anti-tip device must be
installed according to the
instructions in your Use &
Care Manual. Failure to do
so will result in injury.
WARNING
When reversing the door swing:
You MUST move the anti-tip bracket to align
with the hinges of the door. Failure to do so
will result in injury.
NOTE
Raise the front of the refrigerator enough so
the doors close freely when opened halfway.
The refrigerator should slope ¼ inch to
½ inch from front-to-back. Then level the
refrigerator from side-to-side.
To level the cabinet using the front
rollers:
1 Remove the toe grille.
2 Use a flat-blade screwdriver or ⅜ inch
socket wrench to raise or lower the front
rollers (Figure 2).
Figure 4 (some models)
Lower
Anti-tip
Bracket
Raise
Figure 3
Raise
Figure 2
or
3 Use adjustable wrench to adjust leveling
screws. Lower the leveling screws on each
side clockwise until they contact the floor
(Figure 3).
4 Some models are equipped with an anti-
tip bracket (Figure 4). Lower it clockwise
until it contacts the floor.
some models
INSTALLATION
- FFHT2021QW FFTR1821QB FGHT1846QE FFHT2131QM FFHT1821QW FFTR2021QW FFHT1814QW FFHT2131QS FFTR1821QW FFHT2021QS FGTR2044QP FFTR1514QW FFTR1521QW FGTR2044QE FGTR1845QF FFHT1614QW FGTR2044QF FFHI1831QS FFTR2131QP FFHT1814QB FFTR1814QB FGHT2046QP FFHT1831QP FFHT1521QW FFTR2021QS FGTR1845QP FFHT2131QP FGHT2046QE FFHT2021QB FGTR2045QF FGTR1844QF FFHI1831QP FFTR1831QS FGTR2045QP FFHT1621QB FFTR2131QE FGHI2164QE FFTR1821QS FFHT1821QS FFHT1821QB FGTR1845QE FFTR1621QW FFTR2021QB FFHT1514QW FGHT1846QP FGTR1844QE FFHI2131QP FFTR1814QS FFTR1614QW FFTR1614QB FGHI1864QP FGHT2046QF FFHI1831QE FFHT1621QW FGTR1844QP FFTR2131QS FFHI2131QE FFHT2131QE FFHT1614QB FFTR1821QM FGHI1864QE FGHT1846QF FFTR1621QB FFHT1614QQ FFHT1514QB FGHI2164QP FGHI1864QF FFHI2131QS FFHT1621QS FGTR2045QE FGHI2164QF