beautypg.com

Chrysler 2005 300 SRT8 User Manual

Page 118

background image

complete the programming of a rolling code equipped
device (most common garage door openers require this
step.

6. At the garage door opener receiver (motor-head unit)
in the garage, locate the

ЉlearnЉ or ЉsmartЉ button. This

can usually be found where the hanging antenna wire is
attached to the motor-head unit.

7. Firmly press and release the

ЉlearnЉ or ЉsmartЉ button.

(The name and color of the button may vary by manu-
facturer.)

NOTE:

There are 30 seconds in which to initiate step

eight.

8. Return to the vehicle and firmly press, hold for two
seconds and release

the programmed HomeLink button.

Repeat the

؆press/hold/release؆ sequence a second time,

and, depending on the brand of the garage door opener
(or other rolling code equipped device), repeat this
sequence a third time to complete the programming.

HomeLink should now activate your rolling code
equipped device.

NOTE:

To program the remaining two HomeLink but-

tons, begin with

ЉProgrammingЉ step two. Do not repeat

step one

. For questions or comments, please contact

HomeLink at www.homelink.com or 1-800-355-3515.

Canadian Programming/Gate Programming
Canadian radio-frequency laws require transmitter sig-
nals to

Љtime-outЉ (or quit) after several seconds of

transmission which may not be long enough for
HomeLink to pick up the signal during programming.
Similar to this Canadian law, some U.S. gate operators are
designed to

Љtime-outЉ in the same manner.

If you live in Canada or you are having difficulties
programming a gate operator by using the

ЉProgram-

ming

Љ procedures (regardless of where you live), replace

؆Programming HomeLink؆ step 3 with the following:

NOTE:

If programming a garage door opener or gate

operator, it is advised to unplug the device during the

ЉcyclingЉ process to prevent possible overheating.
3. Continue to press and hold the HomeLink button
while you press and release every two seconds (

ЉcycleЉ)

your hand-held transmitter until the frequency signal has
successfully been accepted by HomeLink. The EVIC

118

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

This manual is related to the following products: