ASG Jergens 26C4APA3I-2CS - Manual

ASG, Division of Jergens, Inc.
Jergens Way, 15700 South Waterloo Road
Cleveland, Ohio 44110-3898
US Contact Toll-free: (888) 486-6163 • Local: (216) 486-6163 • Fax: (216) 481-4519
Email: [email protected]
Item # 26C4APA3I-2CS, FIAM 26C4APA3I-2CS Forward Pistol Grip Triple Air Inlet Auto Shut-Off
Pneumatic Screwdriver Ported for Error-Proofing
QUOTE
FIAM 26C4APA3I-2CS Forward Pistol Grip Triple Air Inlet Auto Shut-Off
Pneumatic Screwdriver Ported for Error-Proofing
FIAM 26C forward pistol grip auto shut-off pneumatic screwdrivers are known for unparalleled reliability and repeatability -
cycle after cycle. The innovative TRACS torque control system ensures accurate fastening operations on hard and soft
joints. High power to weight ratio ensures ultimate performance. Optimized ergonomic design ensures operator comfort.
Fully reversible tool delivers full torque for tightening operations as well as fastener removal. Oil-less motor requires less
lubrication than standard screwdrivers during operation. Triple air inlet model allows freedom of movement and versatility.
Equipped with pneumatic pick-up signal port for error-proofing operations. Compatible with FIAM TOM (Torque Operation
Monitor) unit.
• High precision, gold standard quality auto shut-off technology
• Air inlets on the top and end of the screwdriver as well as on the bottom of the pistol grip
• Air inlet coupling, clutch adjustment key, tool hanger and additional clutch spring included as standardd
• Forward Pistol Grip with Trigger Start operaton
• 1/4" Hex drive
• Torque range 3.54 to 35.4 lbf.in (0.4 to 4 N.m)
• Particularly ideal for applicatons with recurring fastener loosening such as those typical to the electrical, electronics and
wire harness industries and where quality control is essential
· SPECIFICATIONS · CLASSIFICATION · WARRANTY
SPECIFICATIONS
Model No.
26C4APA3I-2CS
Drive Size
1/4 in. hex
Driver Type
Forward Pistol Grip
Operation
Trigger Start
Torque
0.4 to 4 N·m
3.54 to 35.4 lbf·in
Free Speed
2000 rpm
Length
8.35 in
212 mm
Dia.
1.46 in
37 mm
4/13/2014 | Page 1 of 2