Culligan Water Tower User Manual
Page 12
10
9. Clean filter housings/manifold, inside and outside, with washcloth and cleaning
solution. Do not use abrasive materials.
10. Rinse housings/manifold with clean potable water.
11. Inspect filter housing O-ring groove and manifold O-ring surface for damage such as
nicks or scratches. Replace if damaged.
12. Place a small amount of O-ring lubricant on surface of filter housing O-ring. Install
O-ring into housing.
TO SANITIZE THE SYSTEM: Complete Steps 13-33.
TO INSTALL FILTERS: Complete Steps 20-33.
FIG. 5