Cuisinart SS-1 - Manual (Page 10)

10
PROBLEM CAUSE SOLUTION
Pod and Brew
buttons are
slow-flashing
Boiler not primed
• Hold down POD and BREW buttons
simultaneously for approx. 2 seconds
to prime
• When the boiler has been primed the
unit will begin heating
• Once the unit has heated it will be in
standby mode
Power button
is fast-flashing
(with beeping sound)
Water reservoir
not in place
Low water
• Return water reservoir to unit
• Once the unit has heated, it will return
to standby
• Refill water reservoir
• Once unit has heated, it will return to
standby
Brew button
is fast-flashing
(with beeping sound)
Brew cup not in place
Too much ground
coffee
• Return brew cup to unit
• Press Brew button to resume brewing
process
• Remove brew cup from unit
• Make sure brew cup contains no more
than 4 tablespoons of ground coffee
• Return brew cup to unit
• Press Brew button to resume brewing
process
Clean button
is fast-flashing
(with beeping sound)
Brew cup not
removed
(when cleaning)
Brew cup partially
removed
(when cleaning)
• Remove brew cup from unit
• Press Clean button and the unit will
resume clean function
• Remove brew cup from unit
• Press clean button twice and the unit
will resume the clean function.
TROUBLESHOOTING