ASG Jergens 15C2AL-2CS - Manual

ASG, Division of Jergens, Inc.
Jergens Way, 15700 South Waterloo Road
Cleveland, Ohio 44110-3898
US Contact Toll-free: (888) 486-6163 • Local: (216) 486-6163 • Fax: (216) 481-4519
Email: [email protected]
Item # 15C2AL-2CS, FIAM 15C2AL-2CS Lever Start Auto Shut-Off Pneumatic Screwdriver Ported for
Error-Proofing
QUOTE
FIAM 15C2AL-2CS Lever Start Auto Shut-Off Pneumatic Screwdriver Ported
for Error-Proofing
FIAM 15C auto shut-off pneumatic screwdrivers are known for unparalleled reliability and repeatability - cycle after cycle.
The innovative TRACS torque control system ensures accurate fastening operations on hard and soft joints. High power
to weight ratio ensures ultimate performance. Optimized ergonomic design ensures operator comfort. Fully reversible tool
delivers full torque for tightening operations as well as fastener removal. Oil-less motor requires less lubrication than
standard screwdrivers during operation. Equipped with pneumatic pick-up signal port for error-proofing operations.
Compatible with FIAM TOM (Torque Operation Monitor) unit.
• High precision, gold standard quality auto shut-off technology
• Clutch adjustment key, tool hanger and additional clutch spring included as standard
• 1/4" Hex drive with Lever Start operation
• Torque range 3.54 to 17.7 lbf.in (0.4 to 2 N.m)
• Ideal for mechanical, electrical, electronics and furniture industry applications where quality control is required
· SPECIFICATIONS · CLASSIFICATION · WARRANTY
SPECIFICATIONS
Model No.
15C2AL-2CS
Drive Size
1/4 in. hex
Driver Type
Inline
Torque
0.4 to 2 N·m
3.54 to 17.7 lbf·in
Free Speed
2000 rpm
Length
8.98 in
228 mm
Dia.
1.50 in
38 mm
Weight
20.81 oz
1.30 lb
0.59 kg
Air Inlet
1/4" NPT
4/13/2014 | Page 1 of 2