Dodge 2015 Dart - User Guide User Manual

Page 59

• When connecting your MP3/WMA Player device for the first time, the system may take

several minutes to read your music, depending on the number of files. For example, the
system will take approximately five minutes for every 1,000 songs loaded on the
device. However, music on the device will play while reading continues in the
background. Also during the reading process, the Shuffle and Browse functions will be
disabled. This process is needed to ensure the full use of your MP3/WMA Player
features and only happens the first time it is connected. After the first time, the reading
process of your iPod

will take considerably less time unless changes are made or new

songs are added to the playlist.

• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone

devices. The

USB port also supports playing music from compatible external USB Mass Storage
Class memory devices. Some iPod

software versions may not fully support the USB

port features. Please visit Apple’s website for iPod

software updates.

Uconnect® Phone — Bluetooth® Hands Free Calling — If Equipped

The Uconnect

Phone is a voice-activated, hands-free, in-vehicle communications

system with Voice Command Capability (see Voice Command section).

The Uconnect

Phone allows you to dial a phone number with your mobile phone using

simple voice commands.

Refer to your vehicle Owner's Manual on the DVD for further details.

NOTE:
• The Uconnect

Phone requires a mobile phone equipped with the Bluetooth

Hands-Free

Profile, Version 1.0 or higher. For Uconnect

customer support, call 1-877-855-8400 or

visit UconnectPhone.com. Canadian Residents: call 1-800-465–2001 (English) or
1-800-387-9983 (French) or visit UconnectPhone.com.

• Prior to starting the pairing procedure, ensure all additional Bluetooth

devices or

phones within the vehicle have their Bluetooth

disabled.

Phone Pairing

To use the Uconnect

Phone feature, you must first pair your Bluetooth

phone with the

Uconnect

system.

Start Pairing Procedure
1. Push the “Phone” button

to begin.

2. Wait for the “ready” prompt and BEEP.
3. After the BEEP, say “Setup Phone Pairing”.
4. After the BEEP, say “Pair a Phone”.
5. Follow the audible prompts.
6. You will then be asked if paired device should be set to favorite.

E L E C T R O N I C S