Dodge 2015 Charger-SRT - Owner Manual User Manual

Page 343

8. Passenger Temperature Control Down Button

Provides the passenger with independent temperature

control. Push the button on the faceplate for cooler

temperature settings or on the touchscreen, press and

slide the temperature bar button towards the blue arrow

for cooler temperature settings.
NOTE:

Pressing this button while in Sync mode will

automatically exit Sync.
9. SYNC

Press the Sync button on the touchscreen to toggle the

Sync feature On/Off. The Sync indicator is illuminated

when this feature is enabled. Sync is used to synchronize

the passenger temperature setting with the driver tem-

perature setting. Changing the passenger temperature

setting while in Sync will automatically exit this feature.

10. Blower Control

Blower control is used to regulate the amount of air forced

through the climate system. There are seven blower speeds

available. Adjusting the blower will cause automatic mode

to switch to manual operation. The speeds can be selected

using either the blower control knob on the faceplate or the

buttons on the touchscreen as follows:
Blower Control Knob On The Faceplate
The blower speed increases as you turn the blower

control knob clockwise from the lowest blower setting.

The blower speed decreases as you turn the blower

control knob counterclockwise.
Button On The Touchscreen
Use the small blower icon to reduce the blower setting

and the large blower icon to increase the blower setting.

Blower can also be selected by pressing the blower bar

area between the icons.

UNDERSTANDING YOUR INSTRUMENT PANEL 341