beautypg.com

Linking and unlinking the remote keyless, Entry transmitter to memory – Dodge 2015 Charger-SRT - Owner Manual User Manual

Page 143

background image

Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory

Your RKE transmitters can be programmed to recall one

of two pre-programmed memory profiles by pushing the

UNLOCK button on the RKE transmitter.
NOTE:

Before programming your RKE transmitters you

must select the “Memory To FOB” or “Personal Settings

Linked To Fob” feature through the Uconnect® system

screen. Refer to “Uconnect® Settings” in “Understanding

Your Instrument Panel” for further information.
To program your RKE transmitters, perform the follow-

ing:
1. Place the vehicles ignition to the OFF position.
2. Select desired memory profile (1) or (2). The system

will recall any stored settings for this profile. Wait for

the system to complete the memory recall before

continuing to Step 3.

NOTE:

If a memory profile has not already been set,

refer to ЉProgramming The Memory FeatureЉ in this

section for instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release

the SET (S) button on the memory switch, then push

and release button (1) or (2) accordingly. “Memory

Profile Set” (1 or 2) will display in the Drivers Infor-

mation Display (DID).

4. Push and release the LOCK button on the RKE trans-

mitter within 10 seconds.

NOTE:

Your RKE transmitters can be unlinked from

your memory settings by pushing the SET (S) button, and

within 10 seconds, followed by pushing the UNLOCK

button on the RKE transmitter.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141