Ram Trucks uconnect 8.4AN for Chrysler - Manual (Page 127)

• Vehicle must be equipped with Uconnect 8.4A/8.4AN.
Not available on Uconnect 5.0.
Tips and Shortcuts
• Pandora® will launch with the last setting and play list
you chose. To change this, select the “Station List”
button on the touchscreen in lower left corner to select
another station.
• Steering wheel controls supported are for “next track”
(until reaching maximum skips – for free account).
FAQs
1. Why can’t I get Pandora® Via Mobile to work? Here
are some things to consider:
• Check to ensure you have linked your Pandora®
account credentials with Uconnect® Access. This is
usually done during registration and setup. Then,
check to ensure you have properly connected your
compatible smartphone to the vehicle touchscreen.
The Uconnect® Access App must be open and you
must be logged in. A blue light indicates that it’s
providing data to the vehicle.
• If you recently changed your password for
Pandora®, it may need to be updated on Mopar
Owner Connect under the “Via Mobile” section.
2. If I changed my password for Pandora®, do I have to
update it with Uconnect® Access? Yes. Visit
moparownerconnect.com, log in, and click on Via
Mobile.
3. How do I set up a Pandora® account? You can create
an account with Pandora® by visiting pandora.com.
To make changes to an existing Pandora® account,
visit the Pandora® website.
4. Can I create a Pandora® account during Uconnect®
Access registration and setup? There is a link from the
Via Mobile profile page where the customer can go to
the Pandora® website to create a new account.
126 ALL ABOUT Uconnect® ACCESS