Clock setting – Dodge 2015 Durango - Uconnect 5.0 Manual User Manual
Page 15
• Balance/Fade — Press the “Balance/Fade” button
on the touchscreen to adjust the sound from the
speakers. Use the “arrow” button on the touch-
screen to adjust the sound level from the front
and rear or right and left side speakers. Press the
Center “C” button on the touchscreen to reset
the balance and fade to the factory setting. Press
the “Back Arrow” button on the touchscreen
when done.
• Speed Adjustable — Press the “Speed Adjusted
Volume” button on the touchscreen to select
between OFF, 1, 2 or 3. This will decrease the
radio volume relative to a decrease in vehicle
speed. Press the “Back Arrow” button on the
touchscreen when done.
• Loudness — Press the “Loudness” button on the
touchscreen to select the Loudness feature.
When this feature is activated it improves sound
quality at lower volumes.
Clock Setting
1. If a SETTINGS button on the right side of faceplate
exists, push this button. If not, push the MORE button
on the faceplate then the “Settings” button on the
touchscreen.
2. Select the “Clock and Date” button on the touchscreen.
3. Next, select “Set Time” to change the time.
4. Select “Set Date” to change the date.
5. To set the time, select the “Seek Up”
or “Seek
Down”
arrows as appropriate. Select “12 hrs vs
24 hrs”, “AM” or “PM” or select the “Time Zones”
(if equipped).
6. Select “Done” when complete.
14 RADIO MODE