beautypg.com

Universal garage door opener (homelink®), Before you begin programming homelink, Electronics – Dodge 2014 Grand_Caravan - User Guide User Manual

Page 88

background image

Auto Unlock Doors On Exit

To have all of the vehicle doors unlock when any door is opened:

• Enter your vehicle and close all the doors, and fasten your seat belt.

• Cycle the ignition switch between the LOCK and ON position four times, ending in the

LOCK position (do not start the engine).

• Push the power door UNLOCK switch to unlock the doors. A single chime will indicate that

programming is complete.

Sound Horn With Lock

To turn the horn chirp on or off when the doors are locked:

• Push the LOCK button and PANIC button at the same time for at least four seconds, but

no longer than 10 seconds.

• Release both buttons at the same time.

Flashing Lights With Lock

The turn signal lights flash when the doors are locked, which can be turned on or off. To turn
this feature on or off:

• Push and hold the UNLOCK button and the LOCK button at the same time for at least four

seconds, but no longer than 10 seconds.

• Release both buttons at the same time.

UNIVERSAL GARAGE DOOR OPENER (HomeLink®)

• HomeLink® replaces up to three hand-held transmitters that operate devices such as

garage door openers, motorized gates, lighting or home security systems. The HomeLink®
unit is powered by your vehicles 12 Volt battery.

• The HomeLink® buttons that are located in the overhead console or sunvisor designate

the three different HomeLink® channels.

• The HomeLink® indicator is located above the center button.

Before You Begin Programming
HomeLink®

Ensure that your vehicle is parked outside of
the garage before you begin programming.

For efficient programming and accurate
transmission of the radio-frequency signal,
it is recommended that a new battery be
placed in the hand-held transmitter of the
device that is being programmed to the
HomeLink® system.

ELECTRONICS

86