beautypg.com

Getting started – Dodge 2014 Grand_Caravan - User Guide User Manual

Page 20

background image

NOTE:
Before programming your RKE transmitters you must select the select “RKE Linked to
Memory” in the Electronic Vehicle Information Center (EVIC). Refer to “Programmable
Features” in “Electronics” for further information.

• To program a Key Fob to the memory position:

1. Cycle the vehicles ignition to the OFF position.

2. Select the desired memory profile 1 or 2.

3. Press and release the S (SET) button on the memory switch, then within five seconds

press and release the 1 or 2 button accordingly.

4. Press and release the LOCK button on the RKE transmitter within 10 seconds.

• To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the

programmed RKE transmitter.

CAUTION!

Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped by
an obstruction in the seat’s path.

WARNING!

Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of
the seat could cause you to lose control. The seat belt might not be properly adjusted,
and you could be severely injured or killed. Only adjust a seat while the vehicle is
parked.

Do not ride with the seatback reclined so that the seat belt is no longer resting against
your chest. In a collision, you could slide under the seat belt and be severely injured
or killed. Use the recliner only when the vehicle is parked.

GETTING STARTED

18