beautypg.com

Rear wiper, High beams, Flash to pass – Dodge 2014 Grand_Caravan - User Guide User Manual

Page 32: Operating your vehicle

background image

Rain Sensing Wipers

• This feature senses moisture on the vehicle’s windshield and automatically activates the

wipers for the driver when the switch is in the intermittent positions. Refer to Program-
mable Features in Electronics for further details.

Mist

• Push the end of the lever inward to the first detent when a single wipe is desired.

NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be
sprayed on the windshield. The wash function must be activated in order to spray the
windshield with washer fluid.

Washer Operation

• Push the end of the lever inward to the second detent and hold for as long as spray is

desired.

Rear Wiper

• Rotate the center portion of the lever forward to the first detent for rear wiper operation.

Rear Washer

• Rotate the center portion of the lever past the first detent to activate the rear washer.

High Beams

• Push the lever away from you to activate the high beams.

A high beam symbol will illuminate in the cluster to indicate the high beams are on.

NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on until

the lever is released.

OPERATING YOUR VEHICLE

30