Dodge 2014 Durango - User Guide - Manual (Page 138)

Oil Life Reset
Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Due”
message will flash in the EVIC display for approximately 10 seconds after a single chime
has sounded, to indicate the next scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the engine oil change interval may
fluctuate, dependent upon your personal driving style.
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (Do not start the engine.)
• Push and release the DOWN arrow button to scroll downward through the main menu
to “Vehicle Info”.
• Push and release the RIGHT arrow button to access the ”Oil Life” screen.
• Push and hold the RIGHT arrow button for one second to access the ”Oil Life Reset”
screen.
• Push and hold the DOWN arrow button until the screen shows 100% oil life.
• Push and release the Up arrow button to exit the EVIC screen.
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to the ON/RUN position (Do not start
the engine.)
• Push and release the DOWN arrow button to scroll downward through the main menu
to “Vehicle Info”.
• Push and release the RIGHT arrow button to access the ”Oil Life” screen.
• Push and hold the RIGHT arrow button for one second to access the ”Oil Life Reset”
screen.
• Push and hold the DOWN arrow button until the screen shows 100% oil life.
• Push and release the Up arrow button to exit the EVIC screen.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this procedure.
WHAT TO DO IN EMERGENCIES
136