beautypg.com

To enter remote start mode, To enter the vehicle after remote start – Dodge 2014 Grand_Caravan - Owner Manual User Manual

Page 35

background image

The EVIC message stays active until the ignition is turned
to the ON/RUN position.

To Enter Remote Start Mode

Press and release the REMOTE START button
on the RKE transmitter twice within five sec-
onds. The vehicle doors will lock, the parking
lights will flash and horn will chirp twice (if

programmed). Then, the engine will start and the vehicle
will remain in the Remote Start mode for a 15-minute
cycle.

NOTE:

• If your power door locks were unlocked, Remote Start

will automatically lock the doors.

• The park lights will turn on and remain on during

Remote Start mode.

• For security, power window and power sunroof op-

eration (if equipped) are disabled when the vehicle is
in the Remote Start mode.

• The engine can be started two consecutive 15-minute

cycles with the RKE transmitter. However, the ignition
switch must be turned to the ON/RUN position.

To Enter The Vehicle After Remote Start

To enter the vehicle while the engine is running during a
Remote Start, you must first unlock the vehicle using the
UNLOCK button on the transmitter. After the vehicle is
unlocked, you can enter the vehicle, insert the Key Fob
into the ignition switch and turn it to the ON/RUN
position, otherwise the engine will shut off at the end of
15-minute cycle.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

33