Maintaining your vehicle – Dodge 2014 Challenger_SRT - User Guide User Manual
Page 113

Component
Fluid, Lubricant, or
Genuine Part
Capacities
Axle Rear – 3.6L Engine
We recommend you use API GL-5
SAE 75W140 Synthetic Gear
Lubricant.
–
Brake Master Cylinder
We recommend you use MOPAR®
DOT 3 and SAE J1703. If DOT 3 is not
available, then DOT 4 is acceptable.
–
Power Steering Reservoir
We recommend you use MOPAR®
Hydraulic Fluid meeting Chrysler
Material Standard MS-11655.
–
Fuel Selection –
3.6L Engine
87 Octane Acceptable.
89 Octane Recommended
19.1 Gallons (72 Liters)
(Approximate)
Fuel Selection –
5.7L Engine
91 Octane Recommended
19.1 Gallons (72 Liters)
(Approximate)
SRT
Component
Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant –
6.4L Engine
We recommend you use MOPAR®
Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
15.2 Quarts (14.4 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil With Filter –
6.4L Engine
For best performance and maximum
protection under all types of operat-
ing conditions, the manufacturer
only recommends full synthetic
engine oils that meet the American
Petroleum Institute (API) categories
of SN. The manufacturer recom-
mends the use of Pennzoil Ultra™
0W-40 or equivalent MOPAR® engine
oil meeting the requirements of
Chrysler Material Standard MS-12633
for use in all operating temperatures.
7 Quarts (6.6 Liters)
Engine Oil Filter –
6.4L Engine
We recommend you use MOPAR®
Engine Oil Filters.
–
Spark Plugs – 6.4L Engine
We recommend you use MOPAR®
Spark Plugs (Gap 0.043 in [1.1 mm]) .
–
Axle Rear (SRT)
We recommend you use MOPAR®
Synthetic Gear Lubricant SAE
75W–90 (API GL-5) with MOPAR®
Friction Modifier – Hypoid Gear
Additive.
–
MAINTAINING YOUR VEHICLE
111