beautypg.com

Fluids and capacities - srt8, Maintaining your vehicle – Dodge 2013 Challenger_SRT - User Guide User Manual

Page 115

background image

FLUIDS AND CAPACITIES - SRT8

Component

Fluid, Lubricant, or

Genuine Part

Capacities

Engine Coolant– 6.4L Engine

We recommend you use

MOPAR® Antifreeze/ Coolant

10 Year/150,000 Mile Formula

OAT (Organic Additive Tech-

nology).

15.2 Quarts (14.4 Liters) In-

cludes heater and coolant

recovery bottle filled to MAX

level.

Engine Oil With Filter– 6.4L

Engine

For best performance and

maximum protection under

all types of operating condi-

tions, the manufacturer only

recommends full synthetic

engine oils that meet the

American Petroleum Institute

(API) categories of SM or SM/

CF. The manufacturer recom-

mends the use of a full syn-

thetic SAE 0W-40 engine oil

or equivalent.

7 Quarts (6.6 Liters)

Engine Oil Filter– 6.4L Engine

We recommend you use

MOPAR® Engine Oil Filters.

-

Spark Plugs– 6.4L Engine

We recommend you use

MOPAR® Spark Plugs (Gap

0.043 in [1.1 mm]) .

-

Axle Rear (SRT8)

We recommend you use

MOPAR® Synthetic Gear Lubri-

cant SAE 75W–90 (API GL-5)

with MOPAR® Friction Modifier

– Hypoid Gear Additive.

-

Power Steering Reservoir

(SRT8)

We recommend you use

MOPAR® Power Steering Fluid

+ 4, or MOPAR® ATF+4® Auto-

matic Transmission Fluid.

-

Fuel Selection– 6.4L Engine

We recommend you use Pre-

mium Unleaded 91 Octane or

higher.

19.1 Gallons (72 Liters)

(Approximate)

Manual Transmission – If

Equipped

We recommend you use

MOPAR® ATF+4® Automatic

Transmission Fluid.

-

Automatic Transmission – If

Equipped

We recommend you

only use

MOPAR® ATF+4® Automatic

Transmission Fluid.

Failure to use ATF+4 fluid

may affect the function or

performance of your trans-

mission.

-

MAINTAINING YOUR VEHICLE

113

This manual is related to the following products: