Dodge 2013 Challenger_SRT - User Guide - Manual (Page 113)

FLUIDS AND CAPACITIES - NON SRT8
Component Fluid, Lubricant, or Genuine
Part
Capacities
Engine Coolant– 3.6L Engine We recommend you use
MOPAR® Antifreeze/ Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive Tech-
nology).
11.1 Quarts (10.5 Liters) In-
cludes heater and coolant
recovery bottle filled to MAX
level.
Engine Coolant– 5.7L Engine We recommend you use
MOPAR® Antifreeze/ Coolant
10 Year/150,000 Mile Formula
OAT (Organic Additive Tech-
nology).
14.7 Quarts (13.9 Liters) In-
cludes heater and coolant
recovery bottle filled to MAX
level.
Engine Oil with Filter– 3.6L
Engine
We recommend you use API
Certified SAE 5W-20 engine
oil, API Certified. Refer to
your engine oil filler cap for
correct SAE grade.
6 Quarts (5.6 Liters)
Engine Oil with Filter– 5.7L
Engine
We recommend you use API
Certified SAE 5W-20 engine
oil, API Certified. Refer to the
engine oil filler cap for cor-
rect SAE grade.
7 Quarts (6.6 Liters)
Engine Oil Filter We recommend you use
MOPAR® Engine Oil Filters.
—
Spark Plug– 3.6L Engine We recommend you use
MOPAR® Spark Plugs (Gap
0.043 in [1.1 mm]).
—
Spark Plug– 5.7L Engine We recommend you use
MOPAR® Spark Plugs (Gap
0.043 in [1.1 mm]).
—
Automatic Transmission We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid.
Failure to use ATF+4 fluid
may affect the function or
performance of your trans-
mission.
—
Manual Transmission We recommend you use
MOPAR® ATF+4® Automatic
Transmission Fluid.
—
Axle Rear– 5.7L Engine We recommend you use API
GL-5 SAE 75W90 Synthetic
Gear Lubricant (with MOPAR®
Friction Modifier-Hypoid Gear
Additive).
—
MAINTAINING YOUR VEHICLE
111