beautypg.com

Dodge 2013 Challenger - Owner Manual User Manual

Page 92

background image

Can the rear-facing child restraint

touch the back of the front passenger

seat?

Yes

Contact between the front passenger

seat and the child restraint is al-

lowed, if the child restraint manu-

facturer also allows contact.

Can the head restraints be removed? No
Can the buckle stalk be twisted to

tighten the seat belt against the belt

path of the child restraint?

Yes

In positions with cinching latch

plates (CINCH), the buckle stalk

may be twisted up to 3 full turns. Do

not twist the buckle stalk in a seating

position with an ALR retractor.

Installing A Child Restraint with a Switchable
Automatic Locking Retractor (ALR)

1. Place the child seat in the center of the seating

position. For some second row seats, you may need to

recline the seat and/or raise the head restraint to get a

better fit.

2. Pull enough of the seat belt webbing from the retractor

to pass it through the belt path of the child restraint.

Do not twist the belt webbing in the belt path.

3. Slide the latch plate into the buckle until you hear a

“click.”

4. Pull on the webbing to make the lap portion tight

against the child seat.

90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE