beautypg.com

To unlatch the trunk, Using the panic alarm – Dodge 2013 Avenger - Owner Manual User Manual

Page 28

background image

• For vehicles not equipped with the EVIC, perform the

following steps:

1. Press the LOCK button on a programmed RKE trans-

mitter for at least 4 seconds, but not longer than
10 seconds. Then, press the PANIC button while still
holding the LOCK button.

2. Release both buttons at the same time.

3. Test the feature while outside of the vehicle by press-

ing the LOCK button on the RKE transmitter with the
ignition in the LOCK position and the key removed.

4. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

If there is no key in the ignition switch, pressing

the LOCK button on the RKE transmitter while you are in
the vehicle will activate the Vehicle Security Alarm.

Opening a door with the alarm activated will cause the
alarm to sound. Press the UNLOCK button to deactivate
the Vehicle Security Alarm.

To Unlatch The Trunk

Press the TRUNK button on the RKE transmitter two
times to unlatch the trunk.

Using The Panic Alarm

To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is on, the
headlights turn on, the park lights will flash, the horn
will pulse on and off, and the Illuminated Entry system
(if equipped) will turn on.

The Panic Alarm will stay on for three minutes unless
you turn it off by pressing the PANIC button a second
time or if the vehicle speed is 5 mph (8 km/h) or greater.

26

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE