beautypg.com

Flash-to-pass, Fog lights — if equipped – Dodge 2013 Avenger - Owner Manual User Manual

Page 171

background image

Flash-To-Pass

You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will turn on the high beam headlights until the lever is
released.

NOTE:

If the multifunction lever is held in the flash-to-

pass position for more than 15 seconds, the high beams
will shut off. If this occurs, wait 30 seconds for the next
flash-to-pass operation.

Fog Lights — If Equipped

The front fog light switch is on the multifunction
lever. To activate the front fog lights, turn on the

parking lights or the low beam headlights and pull out
the end of the multifunction lever.

NOTE:

The front fog lights will only operate with the

headlights on low beam. Selecting high beam headlights
will turn off the front fog lights.

Front Fog Light Operation

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

169