Dodge 2012 Challenger-SRT - Owner Manual User Manual

Page 80

Driver

Center

Passenger

CRS Lock

First Row

N/A

ALR

Second Row

ALR

• N/A — Not Applicable
• ALR — Automatic Locking Retractor
To install a child restraint, first, pull enough of the seat

belt webbing from the retractor to route it through the

belt path of the child restraint and slide the latch plate

into the buckle. Next, extract all the seat belt webbing out

of the retractor and then allow the belt to retract into the

retractor. Finally, pull on any excess webbing to tighten

the lap portion around the child restraint. Any seat belt

system will loosen with time, so check the belt occasion-

ally, and pull it tight if necessary.

To attach a child restraint tether strap:
1. Rotate the cover over the anchor directly behind the

seat where you are placing the child restraint.

Tether Strap Mounting

1 — Cover

A — Tether Strap Hook

3 — Attaching Strap

B — Tether Anchor

78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE