Dodge 2011 Durango - Owner Manual - Manual (Page 459)

1. Loosen the lug nuts on the road wheel one turn, but do
not remove.
2. Assemble the cover on top of the jack and attach the
lug wrench to the jack tool with the hook.
3. For the front axle, place the jack and protective cap on
the body flange just behind the front tire as indicated by
the triangular lift point symbol on the sill molding. Do
not raise the vehicle until you are sure the jack is fully
engaged.
Jack And Tool Assembly
Lift Point Symbol On Sill Molding
6
WHAT TO DO IN EMERGENCIES 457